DTF Transfer & HTV Application Guide

Choose the right iron-on product for your project, then follow the application directions supplied with that specific item. A DTF transfer, an HTV design, and a finished garment are different products.

DTF transfers

A ready-to-press DTF (direct-to-film) transfer arrives as a printed design on a carrier film. It is applied to a garment or other fabric-compatible item with heat and pressure; it does not need to be cut or weeded. Check the product listing for the included transfer size and suitable fabrics. A transfer listing is for the transfer only unless the listing specifically says it includes a finished shirt or other garment.

HTV iron-on designs

HTV (heat-transfer vinyl) is a vinyl design applied with heat. Cut HTV designs are weeded before application, then positioned with the carrier sheet as directed. Glitter HTV and other vinyl finishes can have different temperature, pressure, and peel requirements, so use the instructions supplied with the specific design and fabric.

Personalized names, numbers, and custom artwork

Before ordering a personalized design, double-check spelling, numbers, size, and color selections. Enter only the text requested by the product options. For a custom photo, image, or logo transfer, upload a clear, high-resolution image and review the listing's sizing and background requirements.

Applying a DTF transfer with a home iron

Use the instructions packaged with your order if they differ from this general guide. For the SEC Apparel home-iron instructions, prepare a firm, heat-safe surface and set the iron to Cotton/High with steam turned off. Pre-press the fabric for 5–10 seconds. Place the transfer design-side down with the carrier film facing up. Press firmly without sliding, working in overlapping sections for 15–20 seconds per section. Let it cool, peel the carrier as directed, then finish-press for about 10 seconds per section.

Heat settings can vary with the transfer, fabric, iron, and press. Test only when the product instructions allow it, and do not apply heat to a fabric that is not listed as suitable.

Aftercare

Wait 24 hours before washing. Wash inside out in cold water; avoid bleach and fabric softener. Tumble dry low or hang dry. Do not iron directly on the finished design.

Shop DTF transfers · Shop iron-on letters · Shop personalized glitter HTV name and number kits